用转移矩阵法数值研究二维正方介质柱光子晶体的传输特性

利用转移矩阵方法对二维正方介质柱光子晶体的传输特性进行了研究,数值计算研究了不同晶格、同一晶格柱体截面面积不同、放置方位角不同时光子晶体的传输特性。数值结果表明光子禁带的宽度与中心频率和晶格结构有很大关系,正方晶格更易形成平坦光子禁带,柱体截面面积大,则形成的禁带较宽,在其他因素相同的条件下柱体放置的方位角对光子禁带有重要影响。数值研究表明在正方介质柱下设计宽平坦光子禁带时,可以首先考虑正方晶格结构,其次设法使柱体截面尽量大一些,最后可通过柱体放置方位角来微调光子禁带的宽度与中心频率以达到设计要求。     

High resolution electronic study of ONO, ONO and ONO: A rovibronic survey covering 11 800-14 380 cm

The 11 800-14 380 cm⁻¹ frequency range has been scanned for rotationally resolved rovibronic transitions in the A²B₂-X²A₁ electronic band system of the symmetric (C_2v) ¹⁶O¹⁴N¹⁶O and ¹⁸O¹⁴N¹⁸O isotopologues and in the corresponding electronic band system of the asymmetric (C_s) ¹⁸O¹⁴N¹⁶O isotopologue. The rotational analysis—reflecting minor differences in mass—in combination with symmetry induced spectral differences allows an identification of 68 ¹⁶O¹⁴N¹⁶O vibronic levels, 26 ¹⁸O¹⁴N¹⁸O vibronic levels and 51 ¹⁸O¹⁴N¹⁶O vibronic levels. The bands are recorded using near infrared fluorescence spectroscopy and a piezo valve based pulsed molecular beam expansion of premixed ¹⁸O₂ and ¹⁴N¹⁶O in Ar. The majority of the observed bands is rotationally assigned and can be identified as transitions starting from the vibrational ground state of one of the isotopologues. Numerous hot bands have also been identified. A comparison of the overall spectroscopic features of C_2v vs. C_s symmetric species provides qualitative information on symmetry dependence of vibronic couplings.     

光锥与TDI-CCD耦合监控中测试目标的一种实现方法

为了给光锥与时间延迟积分电荷耦合器件耦合监控装置提供有效的被测运动条纹，分析了传统推扫成像实验装置的不足之处，设计了电子显示目标滚屏运动装置.采用光学相机对印刷条纹静止成像，并用TDI-CCD数字相机对监视器屏幕上的运动条纹动态成像.实验结果表明，该方案解决了高分辨率的鉴别率图样无法在监视器或投影仪上精确显示的困难.与传统的实验室模拟装置相比，该方案提高了鉴别率条纹的运动稳定性，减小了条纹运动速率与TDI-CCD扫描行频间的失配误差，不仅能够对耦合过程实施监控，而且还能用于耦合系统的像质评价.     

苝二酸酐与嘧啶衍生物的氢键组装

用半经验AM1方法对苝二酸酐与嘧啶衍生物的1:1及1:2氢键复合物进行理论研究,表明随着氢键数目增多,弱相互作用能变大,主体上的供电基和客体上的吸电基有利于氢键相互作用,氢键导致电子从主体流向客体.用INDO/SCI方法计算配合物的电子光谱,表明其长波吸收峰与主体相比发生兰移,各配合物的长波吸收峰位置相差不大,与实验一致.讨论吸收峰兰移的原因并对电子跃迁进行理论指认,同时得到了配合物的双质子转移势能曲线,给出了相对于N-H键的过渡态和活化能.     

Evaluation of PLE exhaustiveness for the extraction of PCBs from sediments and the influence of sediment characteristics

Pressurized liquid extractions were performed on eight sediments in order to investigate if a modified US EPA method (100 °C, 100 bar, n-heptane/acetone (1:1), 2 × 5 min) provided exhaustive extractions of polychlorinated biphenyls (PCBs) from sediment, and to study if the extractability of PCBs from the different sediments was affected by characteristics of the sediment. The recovery from the eight native sediments, contaminated in nature, was between 96.4% and 98.9%, as an average of the recoveries from 10 PCB congeners. Hundred percent recovery was defined as the sum of two consecutive extractions (2 × 5 min each) at the stated conditions. The recoveries of the individual congeners were above 94%, except for one congener in one sediment, which had a recovery of 92%. When the recoveries and different characteristics of the sediments were compared, no correlation appeared between recoveries and sediment PCB concentration, total organic carbon (TOC), soot carbon (SC) or amorphous carbon (AC). The fact that carbon did not influence the extractions was somewhat surprising, since previous experiments have indicated a connection. Instead, statistically significant (p < 0.05) correlations were observed for water content and carbon/nitrogen (C/N) ratio. The decrease in recoveries with decreased water content was attributed to less access of the solvent to the analytes due to less matrix swelling. The lowered recoveries with increased C/N ratio can indicate that a difference in structure of the organic matter exists, which influences the binding strength between the analytes and the matrix. The difference in structure can possibly be explained by different origin of the organic matter or by aging effects. Overall the method was found to be exhaustive and the excellent recoveries show that sediment characteristics do not influence the extractions markedly.     

Study of the effect of swift heavy Ni ion irradiation on ruby single crystal by using the XANES and EXAFS techniques

We have made the XAFS measurements at the Cr–K-edge on natural Indian ruby single crystals (corundum) and its two irradiated samples with fluence 1×10¹² Ni⁶⁺ and 5×10¹² Ni⁶⁺ ions/cm². Irradiated samples show interesting changes in their physical appearance. XANES measurements show progressive decrease in Δ_oct value on increase of Ni fluence in irradiated samples. EXAFS measurements on these samples show decrease in Cr–O distance on increase of Ni fluence. Lowering of Δ_oct value is correlated with the increase of Cr–O distance.     

显像管调制特性的测量与分析

测试了显象管调制特性曲线，并分析了特性曲线与显像管工作原理．     

Interpretive approach to collective effects of electrons in multicenter problems

Interpretive theoretical tools prove valuable in guiding the analysis of experiments in the realm of atomic clusters. Here, we review basic elements of an analytic approach that makes it possible to find and visualize the effective electrostatic potential and Coulomb correlations in multicenter problems. To illustrate the utility of these concepts we apply them to exploring molecular-doped metallic clusters. This study is aiming at a systematic, visual assessment of changes induced in screening, Coulomb correlation and effective potential by varying the charge of the electronegative impurity and its position in the cluster cage.     

三组元乳化液雾化特性的研究

采用Malvern粒度仪对柴油、甲醇和水三组元乳化液的雾化特性进行了研究。实验发现:对于压力雾化喷嘴来说,本文所涉及的乳化液由于粘度高于纯柴油,因此雾化效果比纯柴油差,而且喷射压力、乳化剂的粘度和乳化液的组份对乳化液的雾化特性具有显著的影响。随着喷射压力的升高,乳化液喷雾粒径将随之减小;若乳化液中柴油的含量(柴油不少于50％)降低,乳化液的雾化粒径将随之增加;若采用高粘度的乳化剂,相应乳化液喷雾的粒径也大。     

X波段五腔渡越管振荡器的理论与实验研究

 提出了一种新结构的X波段五腔渡越管振荡器，进行了理论和实验研究。根据场分布进行了一维非线性分析，结果表明该结构可以产生高功率微波，并判断了工作模式，为TM₀₁模的3π/5模。采用粒子模拟验证了一维非线性分析的结论，并优化设计出五腔渡越管振荡器,优化结果为：输出功率约1 GW， 工作频率9.3 GHz，束波转换效率约22%。实验中，通过参数调节，得到频率约9.25 GHz，峰值功率约780 MW，脉宽（半高宽）21 ns的输出微波，束波转换效率约为16%。实验结果与模拟结果基本符合。